13215 Part by Nmc Wollard Inc with NSN 5315-00-298-1669 - Request a Quote Now

Part Number: 13215

Manufacturer: nmc wollard inc

NSN: 5315-00-298-1669

CAGE Code: 99235

NIIN: 002981669

Item Name : pin grooved headless

INC Code: 02386

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5315 Nails Machine Keys and Pins

For competitive procurement options on part number 13215 from Nmc Wollard Inc (CAGE Code 99235), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 13215 Details:

Part number 13215 is manufactured by Nmc Wollard Inc and listed with the item name Pin Grooved Headless. Classified under NSN 5315-00-298-1669, the NIIN of this item is 002981669, its INC is 02386, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5315 Nails Machine Keys and Pins. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 13215

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 13215 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 13215 with NSN 5315-00-298-1669, 5315002981669

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-00-298-1669 Item PartTypeName: PIN,GROOVED,HEADLESS	5315	002981669		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
13215	2	9	5

Characteristics Data of NSN 5315-00-298-1669, 5315002981669

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	CHAMFERED
ABHP	OVERALL LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
ABPK	INTERMEDIATE DIAMETER	0.164 INCHES MINIMUM AND 0.168 INCHES MAXIMUM
AMCS	FIRST END TAPER LENGTH	0.031 INCHES NOMINAL
CQBB	SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
CQFX	PIN SMALL END DIAMETER	0.1543 INCHES MINIMUM AND 0.1563 INCHES MAXIMUM
CRDY	FIRST END LOCATION	BOTH ENDS
CRMG	FIRST END TAPER ANGLE	30.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL OVERALL
STYL	STYLE DESIGNATOR	CENTER GROOVE